Roller coated aluminum veneer is a new type of exterior wall decoration material, and its construction process is relatively complex, requiring strict adherence to specifications for operation. The following will provide a detailed introduction to the construction process and precautions for roller coated aluminum veneer.

1、 Construction process of roller coated aluminum veneer

1. Grassroots treatment. Before construction, it is necessary to treat the base layer, including cleaning, repairing, polishing and other processes, to ensure that the base layer is flat, clean, free of oil stains, loose objects, etc.

2. Measure and lay out. According to the design drawings and the actual situation on site, measure and lay out to determine the position and size of the roller coated aluminum veneer.

3. Install the keel. Install the keel below the roller coated aluminum veneer, which should be perpendicular to the wall and evenly spaced.

4. Install the suspension components. Install hangers on the keel, which should be firm and reliable, and able to withstand the weight of roller coated aluminum veneer.

5. Installation of roller coated aluminum veneer. Install the roller coated aluminum veneer onto the lifting device according to the design requirements, paying attention to adjusting the levelness and verticality.

6. Edge sealing treatment. Apply edge sealing treatment at the joints of roll coated aluminum veneer to prevent rainwater infiltration and air pollution.

7. Cleaning and maintenance. After the construction is completed, the construction site needs to be cleaned and maintained to keep it clean and hygienic.

2、 Precautions for roller coated aluminum veneer

Before construction, materials should be inspected to ensure that the quality meets the requirements.

During the construction process, attention should be paid to safety to avoid accidents.

3. During construction, attention should be paid to the protection of materials to avoid damage or pollution.

4. During construction, attention should be paid to environmental protection to avoid polluting the surrounding environment.

5. After construction, the construction site should be cleaned up in a timely manner to maintain cleanliness and hygiene.

The construction process of roller coated aluminum veneer is relatively complex and requires strict adherence to specifications for operation. During construction, it is necessary to pay attention to the quality and safety of materials, and to protect the construction site and the environment. Only in this way can we ensure the quality and effectiveness of construction.